Superbase® 619 Liquid Dish Wash, Car Wash and Hand Cleaner
Superbase® 459 Non-Butyl Degreaser
May 24, 2018Superbase® 813 Maloder Counteractant
May 24, 2018
619 Liquid Dish Wash, Car Wash and Hand Cleaner
Multi-Use Detergant
This Superbase® makes ready-to-sell products that have similar characteristics to the Essential Brand products listed; however, certain physical properties may vary:
- #308 - Liquid Dish Wash
- #337 - Pink Lotion Soap
- #6140 - Liquid Hand Dish Wash
- #6141 - Car and Truck Wash
- #9000 - Blue Lotion Soap
- Removes grease and food soil from dishes, pots, pans, utensils and equipment when used as a dish soap.
- Removes dirt and ground-in grime when used as a hand soap.
- Removes road film, salt residue, insects and other soils when used as a car wash.
- Designed to lather freely in hard or soft water and rinse spot-free.
- Leaves hands soft and smooth.
- Use in multiple-compartment sinks or in buckets for clean-in-place operations.
- Available in 55 gallon drums.
WARNING: Cancer - www.P65Warnings.ca.gov.
Downloadable Files
619 Superbase Concentrate
619SB SDS (Superbase Concentrate)308 Ready to Sell
308 Blend Sheets
308 Label (Ready to Sell)
308 SDS (Ready to Sell) 337 Ready to Sell
6140 Ready to Sell
6141 Ready to Sell
9000 Ready to Sell
Blending Tips/Quality Control Information
- 308
- Always add Powdered Additive 404 to water first.
- Powders dissolve quicker and more thoroughly in hot water with good agitation.
- When hot water is not available, extend agitation time until all powder is dissolved.
- Always add Pink Lotionizer 2033 to batch last.
- Highest amount of hardness of water that blend can be used in: 22 grains or less
- Always refer to the Safety Data Sheet (SDS) for complete health and safety information.
- RI = 26.1 - 27.1
- pH = 7.5 - 8.5
To find out more about Refractometers (RI) and pH Testers please visit the RI and pH information Page
- 337
- Always add Thickening Agent 2330 to water first.
- Use of additional Thickening Agent 2330 beyond recommendation will not make a thicker product. Overuse of thickener will actually cause the product to THIN.
- Powders dissolve quicker and more thoroughly in hot water with good agitation.
- When hot water is not available, extend agitation time until all powder is dissolved.
- If an antiseptic version of 337 is desired, add one gallon of 2315 Antiseptic Additive in place of 1 gallon of water per 55 gallons of RTS product.
- Highest amount of hardness of water that blend can be used in: 22 grains or less
- Always refer to the Safety Data Sheet (SDS) for complete health and safety information.
- RI = 17.1 - 18.1
- pH = 7.2 - 8.2
To find out more about Refractometers (RI) and pH Testers please visit the RI and pH information Page
- 6140
- Always add Powdered Additive 404 to water first.
- Powders dissolve quicker and more thoroughly in hot water with good agitation.
- When hot water is not available, extend agitation time until all powder is dissolved.
- This material is only available undyed. The following dyes are stable with 619 and can be used when making 6140 if desired:
- 3105 - yellow
3106 - pink
3111 - aqua blue
3113 - orange - Start with 32 ounces of dye per 55 gallons (1 liter per 200 liters) of RTS product. Adjust up or down to desired color intensity.
- Note: Overuse of dye may cause staining on light colored surfaces.
- Highest amount of hardness of water that blend can be used in: 22 grains or less
- Always refer to the Safety Data Sheet (SDS) for complete health and safety information.
- RI = 26.0 - 27.0
- pH = 7.6 - 8.6
To find out more about Refractometers (RI) and pH Testers please visit the RI and pH information Page
- 6141
- Always add Powdered Additive 404 to water first.
- Powders dissolve quicker and more thoroughly in hot water with good agitation.
- When hot water is not available, extend agitation time until all powder is dissolved.
- This material is only available undyed. The following dyes are stable with 619 and can be used when making 6141 if desired:
- 3105 - yellow
3106 - pink
3111 - aqua blue
3113 - orange - Start with 32 ounces of dye per 55 gallons (1 liter per 200 liters) of RTS product. Adjust up or down to desired color intensity.
- Note: Overuse of dye may cause staining on light colored surfaces.
- Highest amount of hardness of water that blend can be used in: 22 grains or less
- Always refer to the Safety Data Sheet (SDS) for complete health and safety information.
- RI = 26.2 - 28.2
- pH = 8.1 - 8.7
To find out more about Refractometers (RI) and pH Testers please visit the RI and pH information Page
- 9000
- Always add Thickening Agent 2330 to water first.
- Use of additional Thickening Agent 2330 beyond recommendation will not make a thicker product. Overuse of thickener will actually cause the product to THIN.
- Powders dissolve quicker and more thoroughly in hot water with good agitation.
- When hot water is not available, extend agitation time until all powder is dissolved.
- This material is only available undyed. The following dyes are stable with 619 and can be used when making 9000 if desired:
- 3105 - yellow
3106 - pink
3111 - aqua blue
3113 - orange - Start with 6 ounces of dye per 55 gallons (200 ml per 200 liters) of RTS product. Adjust up or down to desired color intensity.
- Note: Overuse of dye may cause staining on light colored surfaces.
- If an antiseptic version of 9000 is desired, add one gallon of 2315 Antiseptic Additive in place of 1 gallon of water per 55 gallons of RTS product.
- Highest amount of hardness of water that blend can be used in: 22 grains or less
- Always refer to the Safety Data Sheet (SDS) for complete health and safety information.
- RI = 22.4 - 23.4
- pH = 7.2 - 8.2
To find out more about Refractometers (RI) and pH Testers please visit the RI and pH information Page
